Premium car window tinting in Singapore. Three carefully selected Terminax film ranges — tailored to your vehicle, driving comfort and existing factory glass.
Start with your budget, then let us recommend the right shade and front/rear combination for your car. Prices shown are starting rates, not blanket quotations for every vehicle.
Smart daily-driving comfort for value-conscious owners.
CXS SERIESEnhanced IR energy control for regular commuting.
XIR SERIESAdvanced multilayer optical film, high-clarity options.
UCX SERIES*Warranty is subject to the written certificate and exclusions below. UCX 10-year term is stated in the manufacturer technical sheet and confirmed as Shinytomato's intended offering; local supplier quotation lists 5 years and needs written reconciliation. CXS/XIR supplier quotation lists 5 years, whereas manufacturer sheets state 10 years. Performance varies by shade, glass and installation.
For useful heat comparisons, look at TSER (total solar energy rejection), then check VLT (visible light transmission). A darker shade typically rejects more energy — but may not be road legal on your existing glass.
| Film / example shade | VLT | TSER | IR energy rejection | Notes |
|---|---|---|---|---|
| CXS 70 | 73% | 47% | 67% | Lightest CXS shade |
| XIR 70 | 70% | 49% | 69% | Not a reliable front fit on factory-tinted glass |
| UCX 95 | 90% | 24% | 37% | Highest published UCX VLT |
| UCX 90 | 83% | 39% | 62% | Higher heat rejection, less VLT margin |
| UCX 80 | 77% | 46% | 71% | Front fit requires careful testing |
| UCX 40 | 36% | 63% | 71% | Potential rear application only after measurement |
Figures transcribed from your Terminax manufacturer datasheets; tested on specified laboratory glass. These are illustrative shade comparisons, not full-car package performance claims. Manufacturer specifications ↗
| Film shade | VLT | TSER | IRER | UV |
|---|
IRER is infrared energy rejection, not a single-wavelength selective IR reading. Figures may vary under real installation conditions.
Some cars already arrive with factory-tinted or privacy glass. Applying the same dark film to every window may breach Singapore's visibility rules. We assess your original glass before recommending a front/rear hybrid film plan.
If a front window cannot legally accept added film, we may leave it untreated. Hybrid film selections and supplementary UCX upgrades may affect the final quotation.
Illustrative calculation only: glass VLT × nominal film VLT. Actual optical transmission is not guaranteed by this estimate. LTA compliance requires measuring the finished glass and checking other legal requirements. An above-threshold estimate is not approval.
A premium result needs clean glass, proper shrinking, deliberate edge finishing and transparent handover. Our recommended workflow is focused on repeatable quality, not rushing each car through.
Check glass condition, existing tint and suitable VLT.
Protect trim and carefully clean installation surfaces.
Fit and heat-shrink the chosen film to glass curvature.
Apply inside, extract solution and finish edges.
Check workmanship, VLT and provide care guidance.
Shinytomato's proposed Terminax packages start from S$388 for Ceramic-X Spectra, S$588 for Ceramic-X IR and S$888 for UltraCrystal-X. Vehicle dimensions, glazing and hybrid film requirements affect the final quotation.
The highest published TSER values are achieved on darker shades, which may not suit legal road use on all windows. Choose by the actual shade-specific TSER, measured existing glass and your comfort needs—not by a single IR headline.
Sometimes. We first measure the existing VLT, then evaluate suitable options for each pane. Some front or rear windows must remain untreated to maintain the required light transmission.
No. UCX 95 has a nominal 90% VLT, but adding it to glass reduces the combined light transmission. Compliance depends on the final measured glass-and-film system and other LTA conditions.
Shinytomato's intended UCX offering is a 10-year limited warranty, supported by the manufacturer technical sheet. Claims are subject to written warranty terms, qualifying defects, proper maintenance and supplier/local coverage confirmation. Refer to the warranty section below.
Some temporary moisture haze or small water pockets can occur during curing. Drying depends on weather, film and glass. Dust, contamination, significant lifting or persistent defects should be inspected by the installer rather than assumed normal.
Yes, subject to glass condition and assessment. Existing aftermarket-film removal is separately quoted; factory-tinted glass itself is not a removable film. Rear demister lines and aged films can make removal higher risk.
Important information should be easy to find before you make a deposit. These terms are a proposed customer-facing draft for Shinytomato to approve.
Document status: draft terms for business review. Final warranty certificate, GST status and customer service agreement must be approved before publishing this live page.
Extend your window-film enquiry to a standard sunroof or panoramic glass roof. We assess your original glass, roof dimensions and installation suitability before recommending a film.
Optional add-on — price on quotation. The standard S$388 / S$588 / S$888 starting packages do not automatically include sunroof or panoramic-roof glass. Thermal stress and manufacturer restrictions require additional checks; fitting may be declined where unsuitable.
Ask for Roof Tint Pricing ↗No blanket claim that sunroof film is suitable for every EV, sedan, SUV or MPV.
Tell us your vehicle, existing glass condition and any optional sunroof or panoramic-roof tinting needs. We will recommend suitable shades, coverage and final pricing after assessment.
Our most popular starting point is Ceramic-X IR (XIR). We will confirm any high-VLT front-film hybrid needed for your vehicle.